• Step #1 - Create your postback URL
  • Step #2 - Add Propeller Ads as your traffic source on Thrive
  • Step #3 - Retrieve the Global Post-back on Thrive
  • Step #4 - Set up the Campaign on Thrive
  • Step #5 - Set up the Campaign on Propeller Ads

Step #1 - Create your postback URL

Log in to your PropellerAds Advertiser Account, click Tracking.

Your PropellerAds postback URL is created automatically.

Step #2 - Add Propeller Ads as your traffic source on Thrive

1) Log in to your Thrive account and choose "Traffic sources" tab.

2) Click "Add New Traffic Source" from the left navigation.

3) Select PropellerAds at drop down to add and Thrive will pre-populate all the necessary settings for postback url.

Don’t forget to change "REPLACE" to your IDs from postback URL that we have created in Step #1 and can be found on the Tracking screen in your PropellerAds advertiser’s account.

Please note, you need to insert your actual aid & tid, otherwise your conversions will not be tracked correctly!

Step #3 - Retrieve the Global Post-back on Thrive

To get notified about conversions from affiliate network, there are 2 steps:

1) Make sure you are passing the Thrive click ID using {subid} to the affiliate offer URL in the appropriate parameter.

e.g. http://your-offer.com/?s2={subid}

2) Grab the global post-back URL from Thrive's Tracking section:

You'll need to fire back the converted sub ID from the same parameter that you sent the Thrive sub ID to.

e.g. the post-back you place at the network may be formatted as:
http://your-thrive-domain.com/path/postback.php?tid=&offerid=&amount=&subid=#s2#

For further details, please review the article on setting up conversion tracking with an affiliate network in Thrive's support center.

Step #4 - Set up the Campaign on Thrive

Click Campaigns and choose the Create Campaign tab below to open the new campaign configuration menu.

Select "PropellerAds" as the Traffic Source and fill out all other mandatory fields.

The create campaign wizard should take you through the 2 steps to create a campaign.

It will create a new Thrive campaign with the appropriate destination URL to receive your traffic for this campaign accordingly.

You can also check the integration with tracker in the Tracking section of your PropellerAds account.

Step #5 - Set up the Campaign on Propeller Ads

Log in to your PropellerAds Advertiser account, click the Campaigns tab and then the Create Campaign button (or edit one of your existing campaigns).

Copy the Post-Back Pixel URL with all parameters from Thrive campaign settings and paste it as Target URL for your campaign on PropellerAds.

If you are experiencing any problems setting up the S2S conversion tracking - please contact us via the Support tab in your account.

Did this answer your question?